Harvesting energy using roof turbine ventilator and electroactive material has been investigated to verify its performance. Since electric power gained from a single piece of regular size is usually small, auxiliary device to vibrate multiple pieces of electroactive materials in order to harvest more power is required. In this paper, an attempt of using the developed nozzle wind collector associated with the popular roof turbine ventilator employed with gear mechanism to impact and vibrate a group of electroactive material to generate electricity is proposed. Number of blade and blade angle of the roof turbine ventilator are influential to the effectiveness of wind collection. Also, number of electroactive material employed on the turbine ventilator under the wind speed in environment eventually determines the efficiency of wind harvest. A simple model is derived to estimate the minimum driving force from the wind power that needs to overcome the inertia of the turbine ventilator mechanism and the electromechanical energy conversion of electroactive materials. Wind drag force is calculated by using CFD is assumed to provide such driving force. Various combinations of the blade angle, number of blade and electroactive material actuators are investigated in simulations. Optimum design concerning the environment wind resource and configuration of turbine ventilator is discussed. According to several case studies, a few of design trends is addressed for better efficiency of energy harvest. Since multiple electroactive materials are employed, circuitry design with parallel input sources is implemented to sum up the current and integrate the power.
